We are pleased to introduce our long awaited Gold Maxi decoder. MRSP $79.95
Features include:
* Precision silent back emf control that can be tailored to the needs of the
locomotive. Provides exceptional smooth control.
* USB - screw terminal connections to an external power module provides the
ability to detect the DCC signal even on dirty track. We will provide a "Power
-3" module later in the Fall and also provide
instructions for optional user installed battery backup.
* 8 function outputs with special lighting effects
* RailCom support for both address and data transmission. (our implementation of
NMRA Bi directional)
* 3 Amp continuous load without heat sync (optional heat sync can be installed
for greater current capacity)
* Short and overload protected so can handle a hard stall of over 10 amps!
* SUSI sound interface for plug in sound or function module.
* Reed switch control input for optional automatic stopping.
* All the advanced NMRA DCC features you have come to expect in our Gold Series
decoders.
The Silver Mini has the identical software as the Gold Mini but does not support
RailCom or USP. Features include:
* Super smooth and silent high frequency back-emf motor control.
* Asymmetrical DCC support including directional stopping
* Adjustable precision stopping control
* Low speed gear for switching operations
* Selectable for operation with 14/27, or 28/128 speed steps.
* Operation on conventional DC layouts is possible or can be disabled.
* Motor output = 0.5A continuous, 0.8A max, > 2 A stall.
* Motor and function outputs protected
* Two function outputs rated at 100mA each with advanced function mapping
* Directional or independent lighting with dimming and special effects.
* Support for Advanced Consist Control and Extended Addressing
* Support for programming on the mainline (operations mode programming)
* Support for all form of programming as described in NMRA RP-9.2.3
* Supports service mode decoder lock
* Size: L 0.43" x W 0.35"x H 0.11, L 11mm x W 9mm x H 2.8 mm (Mini-W)
New for the North American Market. Work-bench programmer for use with Lenz
throttles LH90 and LH100 or LI computer Interface.
The Black Box Programmer was designed for those users who desire a separate
location for checking out installations and for programming. Using the NMRA
Conforming programming software within our version 3.5 software as a starting
point, the Black Box Programmer was enhanced to allow programming of high
in-rush current sound decoders and allow access to all 1024 CVs.
Requires a external transformer for power and a handheld capable of programming
(such as an LH100, LH90, or LI computer interface with software)
Benefits of this work-bench programmer:
* Programs QSI and other sound decoders without the need for an added resistor
or external programming current amplifier.
* No need to interrupt layout operation when you want to perform service mode
programming.
* Full support for all 1024CVs in direct mode (requires a handheld capable of
1024 CV programming
Black Box Programmer by tttrains - MSRP $59.95 - TRACKSIDE SALES - $49.95
Set-100/10 AMPS (O-Scale, Large Scale) MSRP $499.95
For our O scale and Large Scale customers we have introduced a new 10 amp set.
Due to the internal design of our LV102 power station it is possible to stack
multiple units together to increase the overall amperage. The Set-100/10
consists of a LZV100 a LH100 and a LV102. The LV102 connects to the LZV100 in a
parallel configuration to provide up to 10 amps of track power. Additional
LV102s can be stacked if greater amperage is required.
When stacking LV102s we recommend using a single power supply for the stack. The
Polk Hobbies Crest DC Switching Power Supply is ideal for this application.
